SURFACE • COLOUR • TEXTURE
Matte concrete, soft pearlescence or a subtle shimmer. Start with the finish you love.
Bonntile helps Hong Kong homes and commercial spaces select decorative coatings and materials. Explore Suzuka STRATO interior textures by colour, light and use, then confirm your finish with colour charts and physical samples.
For a TV wall, bedroom feature wall or decorative project, share your preferred effect and site photos so we can help shape your material and sample enquiry.
01 / BONNTILE
Choosing decorative paint goes beyond colour. Matte, pearlescent and shimmering finishes react differently to light. Compare texture and sheen first, then check the product's suitable applications.
Hover over a finish for a quick tip, or tap to select it and read the description below.
Compare matte concrete, soft pearlescence and sandy shimmer. Select a finish to narrow the products and add your preference to the enquiry.
3 products shown
Matte concrete texture
A matte concrete look with Trowel Pattern and Piccolo Pattern directions. Confirm the system for an interior wall or ceiling, and compare the finish for a minimal or industrial design direction.
A concrete look does not imply suitability for floors. Check the product system.
View textures, colours & product dataSoft silky pearlescence
An interior textured coating with silky tones and a pearlescent finish. For soft wall sheen, consider colours alongside furniture and lighting, and compare samples under frontal and side lighting.
A soft pearlescent direction; confirm colour and finish with a sample.
View textures, colours & product data
Sandy texture with a subtle shimmer
A sandy texture with a slight shimmer, distinct from Satin's soft pearlescence. Decide whether you prefer a softer sheen or a more visible sandy texture, then compare physical samples of both.
The sandy shimmer differs from Satin's pearlescence; compare physical samples.
View textures, colours & product dataPhotos are finish references. Confirm colour, texture and sheen with a physical sample.
02 / BONNTILE
Compare Cement Texture for a matte concrete look, Satin for soft pearlescence, or Cashmere for a sandy shimmer. These are finish directions: the existing wall and the selected coating system still need checking.
Consider lighting, the bedhead and furniture colours together. The same shade can look different in daylight and interior lighting. Photos help you explore; physical samples help confirm the result.
Decorative paint or standard emulsion? Decide whether you want uniform colour or more visible texture and sheen, then compare the product data. Decorative paint is not automatically more durable or suitable everywhere.
03 / BONNTILE
Colour charts narrow down shades; physical samples let you compare texture and sheen. Browse the product's Color Library, note your preferred shade and finish, then ask Bonntile about sample arrangements.
Compare matte concrete with silky pearlescence, or Satin's soft sheen with Cashmere's sandy shimmer. Substrate, application technique, lighting and screens can all influence the appearance.
Share your product or shade preference, interior or exterior use, and approximate area. Sample format, collection or delivery, costs and availability are confirmed for each enquiry.
Ask about colours & samplesStart with the product finish. Open the details for comparison tips, then visit each series' Color Library for actual colour references.
Matte concrete texture
Cement Texture
Soft silky pearlescence
Satin
Sandy texture with a subtle shimmer
Cashmere
04 / BONNTILE
Finish photos show the look you want; product data helps confirm whether it suits the location. Check application areas, substrate requirements and the complete coating system together.
Suzuka product pages include colour samples and catalogue links; some also provide set contents, indicative coverage and application tutorials. Use the selected product's data, not another range's coverage or system. Consumption depends on substrate absorption, texture and site conditions.
Browse Suzuka products & catalogues05 / BONNTILE
Budgets depend on the coating system and the project. Clarify whether you need materials only or materials with installation so you can compare the same scope.
Material quotations depend on the chosen product, system and estimated quantity. Share your preferred effect, wall photos and approximate area.
Installation also requires assessment of wall condition, preparation, work scope and site requirements. A material-only price cannot be compared directly with a total installed price.
There is no unverified universal price per square foot; installation enquiries require project assessment.
Ask about your material budget06 / PROJECT SUPPORT
If you already have an applicator, ask Bonntile about products, colours and material data, then have your applicator confirm site requirements. If you need installation, request a referral to Wiseglobal.
Wiseglobal is a Bonntile Group affiliated company providing architectural coating materials and installation. Acceptance, suitable products and work scope depend on project information and site conditions; installation is not guaranteed for every decorative coating.
07 / BONNTILE
For architectural sand textures, dimensional finishes or exterior stone effects rather than interior decorative paint, explore Bonnart separately. Confirm location and system requirements: interior STRATO products are not automatically exterior solutions.
Architectural sand textures and dimensional finishes. Confirm the coating system and suitable locations against the substrate and project conditions.
Multicolour stone-look effects. Share the stone character, colours and grain appearance you prefer, then discuss product and sample information.
Aggregates and stone powder in different sizes and colours create stone-look finishes. Confirm primer, finish and protective system for the location.
Bonnart's page includes Hong Kong architectural finish references. Exact products and application areas for individual projects require the corresponding project records.
View Bonnart systems & Hong Kong references08 / BONNTILE
You can enquire separately about both. Materials-only projects still need a qualified applicator to prepare the substrate and apply the specified system. Installed work requires assessment of materials and site scope. Bonntile clarifies material needs first; installation referrals do not guarantee acceptance for every coating.
Provide the project location, area, existing substrate and surface condition, plus the desired effect or product direction. Wall photos and plans help with initial assessment. Ask for a Wiseglobal referral if required; the project and product system must then be confirmed.
Direct application cannot be promised for all old tiles. Check that tiles and joints are sound and dry, and assess adhesion and the specified system. Hollow, loose or damp areas may need preparation or another solution; decorative paint alone is not a remedy.
Check the location and the product system. General humidity differs from direct shower splashes, and a decorative coating is not a complete waterproofing system. Do not assume every decorative paint is waterproof, mould-resistant or suitable throughout a bathroom.
Confirm the substrate and coating system, then estimate from area and indicative coverage. Absorption, flatness, texture and application technique affect consumption. If a product is not selected, start with site photos; there is no single consumption figure for every range.
Photos are useful references, but lighting, screens, substrate and application technique change the appearance. Use colour charts to narrow down shades, then confirm colour and texture with a physical sample before final selection.
09 / BONNTILE
You do not need to choose every product first. Share an inspiration image, site photos and approximate area, and tell us whether you need materials or an installation assessment. Bonntile will help shape your material and sample enquiry, then direct it to the relevant information or assessment.